Device overview

...

Connecting to the Network

...

To connect the device to a network, either utilise the Ethernet port or Wi-Fi.

Expand
title Connecting via Wi-Fi
By default Wi-Fi is disabled, to enable select Wireless LAN from the Basic Settings screen. Image Added Tap on the switch at the top right to turn Wi-Fi on, then when it appears, tap the correct network SSID. Image RemovedImage Added If required enter the password. If you wish to set up Image Added If a static IP see section Configure Static IP (for Wi-Fi) otherwise tap CONNECT. Image Removed needs to be configured, continue onto the next section, if not click Connect. Configure Static IP (for Wi-Fi) When setting up Wi-Fi check the Advanced options checkbox to expand the list of options. Image RemovedImage Added Under IP settings expand the list and change DHCP to Static. Image RemovedImage Added Fill out static IP settings then tap Connect. Image Removed

Expand
title Connecting via Ethernet
To use Ethernet connect a LAN cable Ethernet port. Image Added Network details will appear under Network → Ethernet on the Basic Settings screen. Configure Static IP (for Ethernet) To configure static details whilst using Ethernet, select Ethernet from the Basic Settings screen. Image Added This will display an overview of the Network settings. Tap Modify network. Image Added Under the IP settings section expand the option DHCP, and choose Static. Image Added Continue to enter the required Static details. Image Added Click Save to confirm.

Connecting to ResourceXpress

From the Basic Settings screen tap Advanced, found in the top right of the screen.

...

Then navigate to Content → AppStart

Enter the ResourceXpress profile URL into the URL field.

...

After entering the correct profile URL, open the Advanced dropdown.
Using the switch, tap to enable the Trust option and, tap to enable Desktop mode.

...

Tap the Set button.
Return to the Basic Settings screen using the back arrow found in the top left of the screen, or view the profile by tapping Play from the left menu.

Configuring RFID

To enable RFID to work with ResourceXpress a simple config file needs to be loaded on the device.

Step 1.

Create/download the config.xml file (see below download).

If you are creating the file, it will need to contain this information.

<configuration xmlns="http://schemas.adfotain.org/config-1.0">
<userPref>
    <prop name="nfc.keyboard.enabled" value="true"/>
    <prop name="nfc.keyboard.options" value='
    {
        "onTagDiscovered":[{
            "data": "Tag.id",
            "format": "HEX"
        },{
            "keyCode":"KEYCODE_ENTER"
        }]
    }'/>
</userPref>
</configuration> 

Step 2.

Copy the config.xml file to a USB flash drive.

Step 3.

Plug the USB flash drive into the devices USB port. The configuration file will be automatically recognised and a reboot will be initialised, after the auto-reboot the new configuration will be applied.