Device overview
Connecting to the Network
To connect the device to a network, either utilise the Ethernet port or Wi-Fi.
By default Wi-Fi is disabled, to enable select Wireless LAN from the Basic Settings screen.
Tap on the switch at the top right to turn Wi-Fi on then when it appears, tap the correct
network SSID.
If required enter the password. If you wish to set up a static IP see section Configure
Static IP (for Wi-Fi) otherwise tap CONNECT.
Configure Static IP (for Wi-Fi)
When setting up Wi-Fi check the Advanced options checkbox to expand the list of options.
Under IP settings expand the list and change DHCP to Static.
Fill out static IP settings then tap Connect.
