Device

...

Connecting to the Network

...

Overview

Front View

...

Rear View

...

Mounting Instructions

This room panel accepts an MIS-D (75 mm x 75 mm) VESA-Compliant mounting interface and the recommended screw is M4 x 10 mm excluding bracket thickness.

Fixing the screws using the two corners at the bottom of the flush mount and the screw at the center top is recommended for an easier, faster, and more stable installation.

Expand
title Mounting on Brick/Stone, Drywall or Wood
Image Added

Expand
title Mounting on Glass or Metal
Image Added

Expand
title Mounting close to a door frame
Image Added

Entering the Settings Menu

For security reasons the Aura-X will run the expected web content after it boots up. If you are the designated technical contact for an Aura-X site, please contact helpdesk@qedas.com for instructions to enter the settings menu. You can also contact our support team using the below numbers.

Setting the Date and Time

From the Basic settings screen tap the currently configured date and time under Time zone

...

Tap the option Select time zone from the Date & time screen

...

Select your region from the list (you can also use the search option to find a region). If your region has multiple time zones you will need to select the relevant time zone from the listed options.

To save the changes tap the main menu icon at the bottom of the screen, you will be taken back to the Basic settings screen.

...

Connecting to the Network

By default, Ethernet is enabled and set to use DHCP. WiFi is disabled by default. Please expand the sections below for advanced network configuration.

Expand
title Connecting via Wi-Fi
By default Wi-Fi is disabled, to enable select Wireless LAN from the Basic Settings screen. Tap on the switch at the top right to turn Wi-Fi on, then tap the correct network SSID. If required enter the password. If a static IP needs to be configured, continue onto the next section, if not click Connect. Configure Static IP ( for Wi-Fi) When setting up Wi-Fi check the Advanced options checkbox to expand the list of options. Under IP settings expand the list and change DHCP to Static. Fill out static IP settings then tap Connect.

Expand
title Connecting via Ethernet
To use Ethernet connect a LAN cable to the Ethernet port. Image Removed Network details will appear under Network → Ethernet on the Basic Settings screen. Image Added Configure Static IP ( for Ethernet) To configure static details whilst using Ethernet, select Ethernet from the Basic Settings screen. Image Removed This will display an overview of the Network settings. Tap Modify network. Under the IP settings section expand the option DHCP, and choose Static. Continue to enter the required Static details. Click Save to confirm.

Connecting to ResourceXpress

From the Basic Settings screen tap Advanced, found in the top right of the screen.

...

...

...

Navigate to Content → AppStart

Enter the ResourceXpress profile URL into the URL field.

...

After entering the correct profile URL, open the Advanced dropdown.
Using the switch, tap to enable the Trust option and, tap to enable Desktop mode.

...

Tap the Set button.
Return to the Basic Settings screen using the back arrow found in the top left of the screen, or view the profile by tapping Play from the left menu.

Configuring RFID

To enable RFID to work with ResourceXpress a simple config file needs to be loaded on the device.

Step 1.

Create/download the config.xml file (see below download).

If you are creating the file, it will need to contain this information.

<configuration xmlns="http://schemas.adfotain.org/config-1.0">
<userPref>
    <prop name="nfc.keyboard.enabled" value="true"/>
    <prop name="nfc.keyboard.options" value='
    {
        "onTagDiscovered":[{
            "data": "Tag.id",
            "format": "HEX"
        },{
            "keyCode":"KEYCODE_ENTER"
        }]
    }'/>
</userPref>
</configuration> 

Step 2.

Copy the config.xml file to a USB flash drive.

Step 3.

...