Device
...
Overview
Front View
...
Rear View
...
Mounting Instructions
This room panel accepts an MIS-D (75 mm x 75 mm) VESA-Compliant mounting interface and the recommended screw is M4 x 10 mm excluding bracket thickness.
...
| Expand | ||
|---|---|---|
| ||
 |
Entering the Settings Menu
For security reasons the Aura-X will run the expected web content after it boots up. If you are the designated technical contact for an Aura-X site, please contact helpdesk@qedas.com for instructions to enter the settings menu. You can also contact our support team using the below numbers.
Location | Contact Number | UK and ROW Sites+44 (1934) 836 960 | |
|---|---|---|---|
USA Sites | +1 (201)-256-1601 | ||
UK and Rest of the world | +44 (1934) 836 960 |
Setting the Date and Time
| Info |
|---|
The configured device time zone has no impact on the clock when viewed from the ResourceXpress room profile web page, this is syncronised with the ResourceXpress web app and uses the application configured time zone. Setting the device time zone correctly is important to ensure the screen performs a nightly auto reboot outside of working hours. |
...
To save the changes tap the main menu icon at the bottom of the screen, you will be taken back to the Basic settings screen.
...
Connecting to the Network
By default, Ethernet is enabled and set to use DHCP. WiFi is disabled by default. Please expand the sections below for advanced network configuration.
| Expand | ||
|---|---|---|
| ||
By default Wi-Fi is disabled, to enable select Wireless LAN from the Basic Settings screen.  Tap on the switch at the top right to turn Wi-Fi on, then tap the correct network SSID.  If required enter the password.  If a static IP needs to be configured, continue onto the next section, if not click Connect. Configure Static IP (Wi-Fi)When setting up Wi-Fi check the Advanced options checkbox to expand the list of options.  Under IP settings expand the list and change DHCP to Static.  Fill out static IP settings then tap Connect. |
| Expand | ||
|---|---|---|
| ||
To use Ethernet connect a LAN cable to the Ethernet port. Network details will appear under Network → Ethernet on the Basic Settings screen.  Configure Static IP (Ethernet)To configure static details whilst using Ethernet, select Ethernet from the Basic Settings screen. This will display an overview of the Network settings. Tap Modify network.  Under the IP settings section expand the option DHCP, and choose Static.  Continue to enter the required Static details.  Click Save to confirm. |
Connecting to ResourceXpress
From the Basic Settings screen tap Advanced, found in the top right of the screen.
...
| Info |
|---|
To get the ResourceXpress profile URL, navigate to the ResourceXpress admin dashboard, from the Resource List, preview the profile to be displayed using the preview icon, then use the URL from this preview. The URL will be in the below format http(s)://<rx.server.address>/meetingmonitor/gen/imeetingroom.html?Id=<Id#> |
Devices can be assigned without specifying a unique ID number. More information can be found in our Screen Security guide.
Tap the Set button.
Return to the Basic Settings screen using the back arrow found in the top left of the screen, or view the profile by tapping Play from the left menu.
...