Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Device overview

Connecting to the Network

To connect the device to a network, either utilise the Ethernet port or Wi-Fi.

 Connecting via Wi-Fi

By default Wi-Fi is disabled, to enable select Wireless LAN from the Basic Settings screen.

screenshot needed

Tap on the switch at the top right to turn Wi-Fi on, then tap the correct network SSID.

screenshot needed

If required enter the password.

screenshot needed

If a static IP needs to be configured, continue onto the next section, if not click Connect.

Configure Static IP (for Wi-Fi)

When setting up Wi-Fi check the Advanced options checkbox to expand the list of options.

screenshot needed

Under IP settings expand the list and change DHCP to Static.

screenshot needed

Fill out static IP settings then tap Connect.

screenshot needed

 Connecting via Ethernet

To use Ethernet connect a LAN cable Ethernet port.

screenshot needed

Connecting to ResourceXpress

From the Basic Settings screen tap Advanced, from the menu on the left choose Content, then AppStart.
screenshot needed

Enter the ResourceXpress profile URL into the URL field.
screenshot needed

To get the ResourceXpress profile URL, navigate to the ResourceXpress admin dashboard, from the Resource List, preview the profile to be displayed using the preview icon, then use the URL from this preview

Expand the Advanced section, ensure Desktop mode is check.
screenshot needed

Tap Set, press the back arrow to return to the

Configuring RFID

  • No labels